Tap any paragraph to write a margin note. Your notes collect in the Desk below the text and file under cases with @. The side-by-side margin rail opens on a larger screen.

Code · CFR · Title 14 — Aeronautics and Space · Part 33 — Airworthiness Standards: Aircraft Engines · § 33.77

§ 33.77. Foreign object ingestion—ice.

354 words·~2 min read·/us/cfr/t14/s§ 33.77·

A research copy — for the controlling text, always check the official state or federal source. Not legal advice.

(a)Compliance with the requirements of this section must be demonstrated by engine ice ingestion test or by validated analysis showing equivalence of other means for demonstrating soft body damage tolerance.
(b)[Reserved]
(c)Ingestion of ice under the conditions of this section may not—
(1)Cause an immediate or ultimate unacceptable sustained power or thrust loss; or
(2)Require the engine to be shutdown.
(d)For an engine that incorporates a protection device, compliance with this section need not be demonstrated with respect to ice formed forward of the protection device if it is shown that—
(1)Such ice is of a size that will not pass through the protective device;
(2)The protective device will withstand the impact of the ice; and
(3)The ice stopped by the protective device will not obstruct the flow of induction air into the engine with a resultant sustained reduction in power or thrust greater than those values defined by paragraph
(c)of this section.
(e)Compliance with the requirements of this section must be demonstrated by engine ice ingestion test under the following ingestion conditions or by validated analysis showing equivalence of other means for demonstrating soft body damage tolerance.
(1)The minimum ice quantity and dimensions will be established by the engine size as defined in Table 1 of this section.
(2)The ingested ice dimensions are determined by linear interpolation between table values, and are based on the actual engine's inlet hilite area.
(3)The ingestion velocity will simulate ice from the inlet being sucked into the engine.
(4)Engine operation will be at the maximum cruise power or thrust unless lower power is more critical. Table 1—Minimum Ice Slab Dimensions Based on Engine Inlet Size Engine Inlet Hilite area (sq. inch) Thickness
(inch)Width
(inch)Length
(inch)00.2503.6 800.2563.6 3000.25123.6 7000.25124.8 28000.35128.5 50000.431211.0 70000.501212.7 79000.501213.4 95000.501214.6 113000.501215.9 133000.501217.1 165000.51218.9 200000.51220.0 [Doc. No. 16919, 49 FR 6852, Feb. 23, 1984, as amended by Amdt. 33-19, 63 FR 14798, Mar. 26, 1998; 63 FR 53278, Oct. 5, 1998; Amdt. 33-20, 65 FR 55856, Sept. 14, 2000; Amdt. 33-34, 79 FR 65537, Nov. 4, 2014]
Connections2 cite this
Citation graph
cites case law
§ 33.77
Foreign object ingestion—ice.
Fed. Reg.×2
Cites 0Cited by 2 across 1 source
★   the supreme law of the land   ★
Don't Tread on Me
E Pluribus Unum — out of many, one

"If you don't know your rights, you don't have any."

Marginalia · a citizen's law index
A research desk, not legal advice. Always read the cited source before relying on a summary.
Questions or an issue? support@self-law.org
disclaimerMarginalia is a research index, not a law firm. Nothing on this site is legal, tax, or financial advice and no attorney–client relationship is formed by using it. Statutes, regulations, and case law change; summaries, search results, AI output, and member posts may be incomplete, out of date, or wrong. Any interpretation drawn from material on this site should be validated by a licensed attorney in your jurisdiction before you act on it.